January 10, 2023
The frequency at which an arc flash study should be done depends on several factors, including the complexity of the electrical system and the rate at […]
January 10, 2023
Conducting an arc flash study can be a complex process that requires a detailed understanding of electrical systems and the hazards associated with them. Here is […]
January 10, 2023
Conducting an arc flash study can be a complex process that involves several steps. Here is a general overview of the steps that are typically involved […]
January 10, 2023
An arc flash analysis is a process used to evaluate the risk of an arc flash event, a type of electrical explosion caused by a rapid […]
January 10, 2023
Arc flash hazard analysis is not explicitly required by OSHA. However, OSHA has a general duty clause that states employers must provide a workplace free from […]
January 10, 2023
An arc flash analysis, also known as arc flash hazard analysis, evaluates the risk of an electrical arc flash event, a type of electrical explosion caused […]
January 10, 2023
An arc flash hazard analysis is a process used to identify and assess the potential hazards associated with electrical equipment and systems. The main goal of […]
January 10, 2023
Various qualified professionals can perform Arc flash hazard analysis, including electrical engineers, electrical safety professionals, and electrical safety consultants. Typically, the individual or team performing the […]
January 10, 2023
Arc flash hazard analysis is not legally required in all circumstances, but it is generally considered a best practice in the electrical industry. Many countries and […]
January 10, 2023
An arc flash hazard study and an incident energy analysis are both evaluations performed to help identify and assess the potential hazards associated with electrical equipment. […]
January 10, 2023
OSHA (Occupational Safety and Health Administration) does not have a specific standard that requires employers to conduct an arc flash analysis. However, as mentioned before, OSHA’s […]
January 10, 2023
OSHA (Occupational Safety and Health Administration) does not have a specific standard that requires an arc flash analysis. Still, it does require employers to evaluate the […]
January 10, 2023
The National Fire Protection Association’s (NFPA) 70E Standard for Electrical Safety in the Workplace requires that employers conduct an arc flash hazard analysis and update it […]
January 10, 2023
Performing an arc flash hazard analysis involves several steps, including: Identifying the electrical equipment and systems that have the potential to generate an arc flash hazard. […]
January 10, 2023
The National Fire Protection Association’s (NFPA) 70E Standard for Electrical Safety in the Workplace recommends that workers who are exposed to electrical hazards receive annual or […]
January 10, 2023
The National Fire Protection Association’s (NFPA) 70E Standard for Electrical Safety in the Workplace is a widely recognized standard for electrical safety in the workplace, and […]
January 10, 2023
While OSHA (the Occupational Safety and Health Administration) does not have a specific standard that requires arc flash training, OSHA’s general duty clause requires employers to […]
January 10, 2023
Arc flash training is typically required for workers who may be exposed to the hazards associated with arc flash incidents, such as electrical engineers, electricians, and […]
January 10, 2023
Yes, it is possible to get arc flash training online. Several online training providers offer arc flash training courses designed to meet the requirements of OSHA, […]
January 10, 2023
The National Fire Protection Association’s (NFPA) 70E Standard for Electrical Safety in the Workplace recommends that workers who are exposed to electrical hazards receive annual or […]
January 10, 2023
OSHA (the Occupational Safety and Health Administration) does not have a specific standard that requires arc flash training. However, OSHA’s general duty clause requires employers to […]
January 10, 2023
The frequency at which arc flash training should be done depends on several factors, including industry standards, regulatory requirements, and the specific hazards present in your […]
January 10, 2023
OSHA (the Occupational Safety and Health Administration) does not have a specific standard that requires arc flash training. However, OSHA’s general duty clause requires employers to […]
January 10, 2023
The frequency of arc flash refresher training depends on several factors, such as the industry, regulatory requirements, and the specific hazards present in your workplace. In […]
January 10, 2023
To become an arc flash trainer, you typically need a strong background and expertise in electrical engineering, electrical safety, and the hazards associated with arc flash […]
January 10, 2023
Arc flash training is typically required for workers who may be exposed to the hazards associated with arc flash incidents, such as electrical engineers, electricians, and […]
January 9, 2023
Shallow enclosures, also known as “low-depth” or “low-height” enclosures, are enclosures that are relatively small in size and have a shallow depth or height. These types […]
January 9, 2023
An arc flash is a dangerous electrical explosion that can occur when high-voltage electricity passes through air between conductors, such as when a circuit is opened […]
January 9, 2023
Fuses and circuit breakers are electrical protection devices designed to interrupt the flow of electricity in the event of an overload or short circuit. However, there […]
January 9, 2023
An arc flash study is a comprehensive analysis of a facility’s electrical system that aims to identify potential hazards and assess the risk of arc flash […]
January 8, 2023
It is difficult to determine which states have the highest number of electrical accidents, as data on electrical accidents are not consistently collected or reported at […]
January 8, 2023
In Europe, the protection of workers from electrical hazards, including arc flash, is regulated by a number of laws and standards. These regulations vary by country, […]
January 8, 2023
IEEE 1584 is a standard developed by the Institute of Electrical and Electronics Engineers (IEEE) that provides guidelines for the calculation of incident energy and arc […]
January 8, 2023
Arc flash personal protective equipment (PPE) is designed to protect workers from the harmful effects of an arc flash, an electrical explosion that can occur when […]
January 5, 2023
An arc flash is an explosive electrical discharge that occurs when an electric current flows through the air between two conductors. It is typically associated with […]
January 4, 2023
There are several misconceptions about arc-flash hazard assessments that can lead to misunderstandings and incorrect approaches to safety in the workplace. These misconceptions include: Arc-flash hazard […]
January 4, 2023
How to Prevent an Arc Flash An arc flash can be extremely dangerous, resulting in serious injuries, including burns, shock, and even death. It is essential […]
January 3, 2023
Fault current is the flow of electrical current through a circuit that is caused by a fault or failure in the system. This can be caused […]
January 3, 2023
Yes, arc flash training is required by OSHA. According to OSHA’s standards for electrical safety in the workplace (29 CFR 1910.303), employers must provide employees with […]
December 28, 2022
Electrical maintenance can help reduce the risk of an arc flash, but it is not the only factor to consider. An arc flash is dangerous when […]
December 27, 2022
Digital circuit breakers can potentially help reduce the risk of arc flash injuries by providing improved protection and monitoring capabilities. Arc flash is a type of […]
December 25, 2022
Electrically insulated gloves protect workers from electrical shock and arc flash hazards when working on or near electrical equipment. There are several different types of electrically […]
December 25, 2022
Arc flash labels are required to be placed in locations where they can be easily seen by workers who may be exposed to arc flash hazards. […]
December 25, 2022
The 2021 edition of the National Fire Protection Association’s (NFPA) 70E standard includes several important changes and updates. Some of the critical changes in the 2021 […]
December 25, 2022
An arc flash is a dangerous electrical explosion that occurs when an electric current passes through the air between two conductors. It is a severe hazard […]
December 25, 2022
NFPA 70E, also known as the Standard for Electrical Safety in the Workplace, is a set of guidelines and requirements for ensuring the safety of workers […]
December 25, 2022
The National Fire Protection Association (NFPA) 70E, Standard for Electrical Safety in the Workplace, is a widely recognized standard that provides guidelines and best practices for […]
December 25, 2022
Training is important for electrical safety because it helps individuals understand how to work with electrical systems and equipment safely. Electrical accidents can be catastrophic and […]
December 18, 2022
NFPA 70E Training helps workers understand and comply with the requirements of the National Fire Protection Association’s (NFPA) Standard for Electrical Safety in the Workplace (NFPA […]
December 18, 2022
Many workers in the industrial and electrical sector may be required to take NFPA 70E training, but confusion about the definitions and requirements of the course […]
The top-tier Facility Results safety team is made up of safety experts, professional electrical engineers, and experienced trainers who are familiar with OSHA’s electrical safety requirements as well as the standards set by the NFPA, NEC, ANSI, and IEEE to provide Arc Flash Training & Studies.
Facility Results will provide a comprehensive model of your power distribution system, including a thorough electrical safety analysis and a complete written program, as part of our Turnkey Incident Energy analysis and bilingual electrical safety training, which will include many of the following components:
ANSI Compliant Labeling FR arrow Short Circuit Analysis on a Single Line
Hazard Reduction
Device Coordination
Outcomes of the Hazard Category
Personal Protective Equipment Recommendations FR arrow Site-Specific Training
Recommendations for Tooling
Continuous Compliance Audits
A Cutting-Edge Change Management Program FR arrow A Continuously Managed Glove Program
Arc Flash Training
NFPA 70E Classes
Bilingual Arc Flash Training
Spanish Electrical Safet Classes based on NFPA 70E
Facility Results has the experience and knowledge to help you navigate the complex and confusing OSHA and NFPA regulations that all employers now mandate. We will work together to find real-world, practical solutions for compliance and implementation. Facility Results has the field experience needed to assess your facility’s needs and recommend a complete solution—from labels to training—as well as the most advanced technology in personal protective equipment. We provide a full-service Turnkey Incident Energy Analysis and Safety Solution emphasizing providing value to the end-user.
Consider this a new tool for arc Arc Flash Training & Study to add to your bucket.
Learn more at www.gotlabels.info.
Other Related Services:
Onsite Arc Flash Training
Hazard/Risk Category (HRC) Assessment
Engineer-Assisted Incident Energy Analysis
Turnkey Incident Energy Analysis