February 3, 2023
According to the National Fire Protection Association (NFPA) 70E and the Occupational Safety and Health Administration (OSHA), it is recommended to inspect electrically insulated tools at […]
February 3, 2023
Electrical safety in the workplace relies heavily on using personal protective equipment (PPE). For more information on personal protective equipment (PPE) in electrical safety, check out […]
February 2, 2023
The National Fire Protection Association (NFPA) 70E standard establishes rules for workplace electrical safety. The standard is intended to safeguard workers from electrical risks and to […]
February 2, 2023
Electricity is a strong energy that is essential to our everyday life. However, it may have both immediate and long-term negative consequences on the human body. […]
February 1, 2023
As an employer to protect your workers’ safety while they are at work. The National Fire Protection Association (NFPA) 70E is a standard that gives standards […]
January 31, 2023
The Low Voltage Directive (LVD), an EU directive, sets the bar for electrical safety in the workplace across Europe. The LVD is a legally binding standard […]
January 30, 2023
The usage of personal protection equipment is one of the most crucial parts of job site safety (PPE). While numerous varieties of PPE are available, such […]
January 29, 2023
Introduction (15 minutes) Overview of the training and its importance Explanation of the NFPA 70E standard and its role in electrical safety Hazard Analysis and Risk […]
January 28, 2023
When working with electricity, it is essential to have the proper personal protective equipment, including electrical gloves. These gloves are designed to protect the wearer from […]
January 27, 2023
According to the National Fire Protection Association (NFPA) 70E and the Occupational Safety and Health Administration (OSHA), it is recommended to inspect electrically insulated tools at […]
January 26, 2023
Arc flash is a dangerous occurrence that can happen in any workplace where electrical equipment is used. It is caused by a sudden release of energy […]
January 26, 2023
The National Fire Protection Association (NFPA) 70E standard is a widely recognized and adopted guideline for electrical safety in the workplace. This standard is designed to […]
January 25, 2023
Electrical accidents can result in serious injury or even death, and the associated costs can be significant. The cost of providing safety training and personal protective […]
January 25, 2023
Another Facility Results’ Training Project Completed On-Time and On-Budget! For Washtenaw County Facilities, Located in Ann Arbor, MI #nfpa70e #electricalsafety #safetytraining #arcflash #arcflashtraining www.FacilityResults.com #onsitetraining #tegg […]
January 24, 2023
Don’t Get Burned: Understanding Arc Flash Hazards in the Workplace Arc flash incidents are a serious concern for workers in industries that rely on electrical equipment. […]
January 23, 2023
Electrical Safety 101: How to Avoid Arc Flash Incidents Arc flash incidents are a serious concern for workers in industries that rely on electrical equipment. These […]
January 22, 2023
Stay Safe on the Job: Learn the Risks of Arc Flash and How to Prevent Them Arc flash incidents are a severe concern for workers in […]
January 21, 2023
According to the NFPA 70E (National Fire Protection Association Standard for Electrical Safety in the Workplace) and OSHA (Occupational Safety and Health Administration), a qualified electrical […]
January 21, 2023
An arc flash study is a detailed analysis of the electrical system of a facility or industrial plant that aims to identify potential hazards associated with […]
January 21, 2023
Our 2-Hour Electrical Safety Training based on NFPA 70E can be done On-Site or On-Line Instructor-Led. Satisfaction Guaranteed! #safety #training #electrical #nfpa70e #BestOfTheBest #TEGG #ArcFlash #ArcBlast […]
January 20, 2023
According to OSHA (Occupational Safety and Health Administration) and the NFPA 70E (National Fire Protection Association Standard for Electrical Safety in the Workplace), an electrical worker […]
January 19, 2023
Arc flash hazards are a serious concern for electrical workers, as they can lead to severe injuries or even death. An arc flash occurs when an […]
January 19, 2023
The National Fire Protection Association (NFPA) 70E is a standard that provides guidelines and regulations for workplace safety, including the use of personal protective equipment (PPE) […]
January 18, 2023
Man hurt in an electrical fire at Fort Worth elementary school continuing to recover. https://www.fox4news.com/news/electrical-fire-fort-worth-elementary-school
January 17, 2023
The Occupational Safety and Health Administration (OSHA) and the National Fire Protection Association (NFPA) 70E are two organizations that provide guidelines and regulations for workplace safety, […]
January 16, 2023
OSHA and the National Fire Protection Association (NFPA) do not specify a specific number of hours for training workers on electrical safety. Instead, they provide guidelines […]
January 15, 2023
There are several specific hazards associated with electrical energy, including: Electric shock occurs when electricity passes through the body, causing injury or death. Electric shock can […]
January 15, 2023
There are several specific hazards associated with electrical energy, including: These hazards associated with electrical energy can be mitigated through proper training, safety procedures, and maintenance […]
January 14, 2023
According to the Occupational Safety and Health Administration (OSHA), electrical injuries occur regularly in the United States. The Bureau of Labor Statistics (BLS) reported approximately 2,000 […]
January 13, 2023
There are several common causes of an arc flash, including: It’s important to note that, many times, an arc flash is a result of multiple factors […]
January 13, 2023
Clarification of language and definitions: The NFPA 70E Standard uses technical language and industry jargon that can be difficult for non-experts to understand. Improving the language […]
January 13, 2023
Arc flash training is essential for workers in the electrical industry, as it helps them understand the hazards associated with electrical systems and how to work […]
January 12, 2023
Dielectric glove testing is a procedure used to determine the electrical insulation properties of rubber gloves and sleeves used by electrical workers. The test is performed […]
January 12, 2023
Field inspection of electrically insulated gloves is a crucial step in ensuring the safety of workers who may be exposed to electrical hazards. Here are the […]
January 12, 2023
EH-rated shoes, also known as an electrical hazard (EH) rated shoes, are a type of safety shoe designed to protect against electrical hazards. These shoes are […]
January 12, 2023
Arc-rated and flame rated are terms used to describe the level of protection provided by clothing and other personal protective equipment (PPE) against electrical arc and […]
January 12, 2023
Lockout and tagout (LOTO) are two separate but related safety procedures that are used to control hazardous energy and prevent accidents while working on machinery and […]
January 12, 2023
A Comprehensive Guide to Lockout Tagout (LOTO) is a step-by-step process designed to help ensure the safety of workers exposed to hazardous energy while working on […]
January 11, 2023
Lockout/Tagout (LOTO) and Arc Flash Training go hand in hand because they both aim to protect workers from the hazards associated with electrical equipment. LOTO procedures […]
January 11, 2023
When training on lockout/tagout (LOTO) procedures, several core topics should be focused on to ensure that employees have a thorough understanding of the procedures and can […]
January 11, 2023
When it comes to lockout/tagout (LOTO) procedures, there are several key points to keep in mind to ensure the safety of workers and compliance with Occupational […]
January 11, 2023
The Occupational Safety and Health Administration (OSHA) requires employers to provide initial and ongoing training for employees who perform lockout/tagout (LOTO) procedures as part of their […]
January 11, 2023
The history of Lockout/Tagout (LOTO) regulations in the United States can be traced back to the Occupational Safety and Health Act (OSHA) of 1970. This act […]
January 10, 2023
An arc flash study is a type of analysis conducted to determine the potential hazards associated with an electrical system. The study is used to identify […]
January 10, 2023
An arc flash study is typically required when a new electrical installation is being designed or when major changes are being made to an existing electrical […]
January 10, 2023
Arc flash labels and an arc flash study are important tools for protecting workers from the hazards of an arc flash. An arc flash is a […]
January 10, 2023
The National Electric Code (NEC) does not require employers to conduct arc flash studies, but it does guide how to address arc flash hazards in the […]
January 10, 2023
The cost of an arc flash study can vary widely depending on the facility’s complexity and the study’s scope. Factors that can affect the cost of […]
January 10, 2023
OSHA does not have a specific requirement for how often an arc flash study must be conducted. Instead, OSHA’s general duty clause requires employers to provide […]
January 10, 2023
An arc flash study is typically required when changes are made to a facility’s electrical distribution system, such as when new equipment is added or existing […]
The top-tier Facility Results safety team is made up of safety experts, professional electrical engineers, and experienced trainers who are familiar with OSHA’s electrical safety requirements as well as the standards set by the NFPA, NEC, ANSI, and IEEE to provide Arc Flash Training & Studies.
Facility Results will provide a comprehensive model of your power distribution system, including a thorough electrical safety analysis and a complete written program, as part of our Turnkey Incident Energy analysis and bilingual electrical safety training, which will include many of the following components:
ANSI Compliant Labeling FR arrow Short Circuit Analysis on a Single Line
Hazard Reduction
Device Coordination
Outcomes of the Hazard Category
Personal Protective Equipment Recommendations FR arrow Site-Specific Training
Recommendations for Tooling
Continuous Compliance Audits
A Cutting-Edge Change Management Program FR arrow A Continuously Managed Glove Program
Arc Flash Training
NFPA 70E Classes
Bilingual Arc Flash Training
Spanish Electrical Safet Classes based on NFPA 70E
Facility Results has the experience and knowledge to help you navigate the complex and confusing OSHA and NFPA regulations that all employers now mandate. We will work together to find real-world, practical solutions for compliance and implementation. Facility Results has the field experience needed to assess your facility’s needs and recommend a complete solution—from labels to training—as well as the most advanced technology in personal protective equipment. We provide a full-service Turnkey Incident Energy Analysis and Safety Solution emphasizing providing value to the end-user.
Consider this a new tool for arc Arc Flash Training & Study to add to your bucket.
Learn more at www.gotlabels.info.
Other Related Services:
Onsite Arc Flash Training
Hazard/Risk Category (HRC) Assessment
Engineer-Assisted Incident Energy Analysis
Turnkey Incident Energy Analysis