The Role of Personal Protective Equipment in NFPA 70E Compliance
February 3, 2023Another Facility Results’ Training Project Completed On-Time and On-Budget!
February 3, 2023
According to the National Fire Protection Association (NFPA) 70E and the Occupational Safety and Health Administration (OSHA), it is recommended to inspect electrically insulated tools at least once per year or before each use, whichever is more frequent. The following steps should be taken during an inspection:
- Visually inspect the tools for any damage, such as cracks, cuts, or burns on the insulation.
- Check for any signs of wear or deterioration, such as frayed or exposed wires.
- Check the condition of the handles, grips, and other parts of the tool that come into contact with the user to ensure they are securely attached and in good condition.
- Check the tools’ labeling and markings to ensure that they meet OSHA and NFPA 70E standards.
- Test the tools for proper electrical insulation using a voltage tester or other appropriate testing equipment.
- If any damage or defects are found during the inspection, the tool should be removed from service and either repaired or replaced.
It’s important to note that if the tool is dropped or exposed to heat, chemicals, or any other environmental factors that may affect the insulation, it should be inspected immediately.
